New X7 Mod. Magpul MOE Handguard on the M16 Barrel Kit

Just finished the MOE Handguard on the M16 Barrel Kit. Modded the Tippmann G36 Shroud to cover the ugly gap in between the barrel and the handguard. Looks better but prefer the SCAR look. Lines are more smooth

Extended Fore Grip Mod

Extended Fore Grip Mod was done using one X7 fore grip & one Phenom fore grip. Initial work was to fill up the holes at the top of the fore grips with 2 part epoxy as the X7 and Phenom fore grips have a different size & depth although the overall shape is the same.

subsequently after the epoxy had set and dried the work to sand the fore grip takes place. This tasks will be easier if you have a dremmel tool. In my case I started with just plain sand paper but proceed to use a hand drill with a dremmel drill bit.

After the holes are sanded down, I started to cut off the part from the Phenom which attach to marker. The part that was cut off is until the devider. This will give you a flat surface to attach with the X7 fore grip. after cutting the surface needs to be sanded again to ensure that there is a flat & even surface to attach with the X7 fore grip. The two fore grip is later together with epoxy.

SCAR With Magpul AFG

SCAR with Magpul AFG

SCAR with Magpul AFG

The following is the list of components used in the SCAR with Magpul AFG

List

- Dboys SCAR Stock- bought from www.ebairsoft.com DIY with X7 back plate

- Shroud - 1 X X7 Shroud + 1 X Phenom shroud secured with 2 part Epoxy

- Magazine - Magpul Pmag - bought from www.ebairsoft.com DIY (will do the write out later)

- Spray job - DIY with Krylon Ultra flat (Khaki color)

- Front Iron Sight - bought from www.ebairsoft.com part called EB foldable battle sight

- Barrel - Hammerhead Battlestikxs

- Cyclone Upgrade - TechT cyclone upgrade with QEPH & TechT Squishy paddles

Some reviews from X7 OG at http://www.x7og.net/assault-m4s-g-36s-etc/22185-scar-magpul-afg-2.html#post360671