Just redid the decals surrounding the headlamps with new Oracal 651 vinyl. looks neater then the previous decal used.

The Civic developed a leak at the VTEC Steel braided hose and was swiftly replaced. Front caliper brake pads was also replaced with a pair of EBC black stuff pads. All patched and ready to go in 2 hours aprox.

Great Job Kenny from Spoon Sports

Grab rail cover arrived...

Grab rail cover arrived from Bangkok dispatched by a friend (Marc). Following his advise, some double sided tapes was used to secure the new covers to the mounts. Bike did look weird without the cover.

Grab rail cover fell off

To my dismay, discovered last weekend tat my gab rail cover on the right side had fell off. Just purchased a new pair from Marc and hope it arrives soon. Will try some means of securing it so that it does not fly off the next time around

Nissin Mono Block Caliper Anyone...?

Pondering the idea of integrating the 2010 Triumph Daytona 675 Front caliper onto the ER6n. Why the 2010 Triumph Daytona 675 caliper you might ask...? The 2010 and later calipers are Mono Block calipers, which means that they are made / Machined from a single piece of forged aluminum. Much stronger, and less prone to the caliper twisting during load. Higher cost due to difficult manufacturing. the Pre 2010 Daytone is equipped with Twin-block calipers which are joined together (front and back) by two pieces with the bolts on front face, top and bottom of the caliper (usually 3 sets each). More prone to twisting. Lower cost than mono-block type.

Some New pictures to wet your appetite...been busy with a new project. So mods are currently put on hold

Another new highest page view record for the WebDC Modding hobbies blog...thanks guys/gals.