Saevid SCR lightweight carbon fiber saddles.

Just received the Saevid SCR for Road usage only. Weight in at a mere 61g. initial test found the SCR to be more comfortable than the Earlier Rockbro carbon saddle. With a very nice Matt carbon shell layout. length 240 mm, width 130 mm and with Oval Rails 8.3 x 7 mm. The SCR is rated only for road use and for riders below 85kg.

Oakley Jawbreaker Customization

Just Customized my Oakley Jawbreaker with a donor Green Fade frame purchased from eBay. Below are some of the picture showing the progress.

Parts used...Upper frame from Jawbreaker White/Fade to Green matted to the Tour de France Jawbreaker - Polished White OO9290-18


The lower frame is removed from the TDF jawbreaker and moved over to the Fade to green frame

Here the icon rings are swapped over....

Then the Screw / Pin is swapped.

End Result is a unique custom Jawbreaker ....

Sportful Bora Hansgrohe Bodyfit Pro-light Jersey & Glove

Got a good deal from probikekit for the Sportful Bora Hansgrohe Bodyfit Pro-light Jersey & Glove

Welcome S-WORKS SL6 BORA ....

New addition to the family....

Welcome S-WORKS SL6 BORA ....


Weighed in at 6.86kg with Look Carbon blade pedal but is now 6.8kg with a full carbon saddle.

Simple Mod to Enhance Ultegra 8070 Di2 Rear Derailleur weight.

Here is a Simple cost effective Mod to Enhance Ultegra 8070 Di2 Rear Derailleur weight.
Simply swap the Ultegra 8070 Aluminium cage to a Dura Ace 9170 Carbon cage.
With this simple mod a weight savings of nearly 20g (19g) can be achieved.

Trek Madone SLR Chrome red Decal seat post wrapped

Trek Madone SLR Chrome red seat post wrapped . DIY wrapped the Trek Madone SLR seatpost with Chrome red decal.

Vellfire Hyper Black Rims on ANH20 Alphard

Vellfire Hyper Black 18" Rims on ANH20 Alphard. The Hyper black rims really looks good on the ANH20 giving it a more muscular stance.

TnG RFid on 2012 ANH20 Alphard

Just installed the Touch n Go RFid tag on the ANH20 2012 Alphard. Required to photocopy your car registration card, insurance cover note (With car registration number-Mandatory)  and owner's identification card . Registration took approximately 20 minutes and the installation less than 15 min including signal testing. * the RFid is not automatically activated. You will need the SMS notification for activation before using.

Once RFid is activated your TnG e-wallet account will be upgraded as well.

Goodbye Ford Ranger Hello Alphard

Had to say Goodbye to the trusted Ford Ranger and bid hello to the Second Generation Toyota Alphard ANH20.

 Recently added the Vellfire 18" Hyper Black Rims. Wrapped in Falken Azenis 235/55/R18 Rubber.

IsoSpeed Toptube rubber maintenance

IsoSpeed Toptube rubber maintenance

After about 2000km I had checked on the Top Tube IsoSpeed rubber and found it had moved a few millimeters to the left. I had gentle removed the rubber piece and added a double sided tape so that it will hold much better than before. Many of my SLR pals have experience the loss of the rubber piece after a few hundred kilometers. I feel that a better design should be to design the rubber as a grommet type of mount that can be inserted into a small hole so that it does not move OR a ring should be added as an anchor to the IsoSpeed bolt for secure positioning and to prevent it from falling off during very bumpy rides.

IsoSpeed top tube with the rubber bumper removed

IsoSpeed Top tube Bumper

IsoSpeed Top tube Bumper reverse side

IsoSpeed Top tube Bumper re positioned (Centered)  and placed back into its original position.

Trek Team Segafredo Santini 2018 kit - White

Trek Team Segafredo Santini 2018 kit -White

Gloves from Santini is the best I have ever used before. with just the right padding at the right places. 120km Broga ride with temperatures up to 40 deg Celsius without feeling any numbness at the hands or wrist.

Trek Madone SLR Thru Axle (Without Lever)

Trek Madone SLR Thru Axle (Without Lever)

Rear Thru Axle. DT swiss with lever-60g

Rear Thru Axle. NeoPro without lever-35g 

Front Thru axle. CarbonTi Leverless - 25g